Conveyor Components

Built For Any Conveyor

We can also supply everything you require for your conveyor such as head and tail drums, spill plates, chutes and many more.

Speak to us about your conveyor

Primary & Secondary Scrapers

Polyurethane blades — with or without tungsten tips — clean the belt under constant pressure with minimal maintenance, designed for effective belt cleaning with low maintenance down time.

Supplied in polyurethane blades with or without tungsten tips
We also offer a metal carrier for the tungsten tip to mount on, this comes with an extraction hole for wet or fine material
Using polymer blades allows constant pressure to be applied
Ease of maintenance
Lower maintenance down time
Service and maintenance contracts available

The optional tungsten tips provide durable cleaning in the most demanding conditions, while the polymer blades keep constant pressure on the belt. Service and maintenance contracts are available to keep your belt cleaning systems performing at their best.

Speak to us about Primary & Secondary Scrapers

IBI primary scraper unit with polyurethane blade

Scraper Blades

A full range of primary and secondary blades — polymer and tungsten-tipped — to suit every flat-belt application, removing residue once the belt has discharged its load into a hopper or chute.

Polymer construction
Used in normal and heavy conditions
Will tolerate clips
Prefers good belt conditions
Head scrapers are supplied in polyurethane for effective cleaning properties

HE1T Primary Tungsten Tip Scraper Blades

Polymer construction with inlaid Tungsten Tip
Used in normal and heavy conditions
Not to be used with clips
All flat belt types
The HE1T has a Tungsten Carbide tip moulded inside the polyurethane
Only use Tungsten Tip in extreme conditions, i.e.
- High speed belts
- Temperature
- Very abrasive material

HE2 Primary Scraper Blades

Polymer construction
Used in light and normal conditions
Not to be used with clips
All flat belt types

HE3 Primary Scraper Blades

Polymer construction
Used in all conditions
Will tolerate clips
All flat belt types

RB1 Secondary Tungsten Tip Scraper Blades

Polymer with Tungsten Tip
Used in light and normal conditions
Flexible blade for soft applications
All flat belt types

RB2 Metal Secondary Tungsten Tip Scraper Blade

Used in wet conditions to aid prevention of build up from discharged materials
Centre cut out for material release
All flat belt types

RB2 Secondary Tungsten Tip Scraper Blades

Polymer with Tungsten Tip
Used in normal to heavy conditions
All flat belt types

RB3 Secondary Tungsten Tip Scraper Blades

Polymer with Tungsten Tip
Used in heavy conditions
All flat belt types

The geometry of a secondary scraper is such that Tungsten Tips can be used safely on the belt. The blades may damage clipped joints, so we do not recommend their use in conjunction with clipped joints.

Speak to us about Scraper Blades

Adjustable Transom

Three-roller sets with adjustable side rollers that set at 20, 30, 40, 50 or 60 degrees to match your material and incline. We can supply the frames and rollers to fit all belt widths.

Speak to us about Adjustable Transom

Anti Spill Cradle

Replaces troughing sets through the loading area to cut spillage dramatically, fully supporting the belt against the skirting rubber to form an excellent seal.

For use in loading area and beyond to replace troughing sets
Reduces spillage dramatically
Fully adjustable steel frames to perfectly match troughing angle
Low friction U.H.M.W Polyethylene covers for belt to glide over
Cuts out dipping of belts between rollers

Protects Skirting & Lowers Cost

Fully supports belt against skirting rubber to form an excellent seal
Increases life of skirting rubbers
Reduces maintenance time
Lowers maintenance costs

Speak to us about Anti Spill Cradle

Blue IBI anti spill cradle fitted under a loaded belt

Belt Tracker

Steers a troublesome belt back straight using a five-bearing centre pivot, activated by the weight of the belt running off-centre. Pre-set stops limit the training force allowing it to centralise.

Designed to track a troublesome belt
The Tip-Steer uses a five bearing centre pivot
The weight of the belt running off-centre activates the tracker
The tracker will steer the belt back straight

The Benefits

Pre-set stops limit the training force allowing the belt to centralise
Centralising the belt to reduce spillage
Reduces structural wear
Also helps prevent belt edge damage

Speak to us about Belt Tracker

Blue IBI belt tracker fitted to a conveyor on site

EZ Drop Return Roller System

Change return rollers safely from the walkway as a one-man job — a single locking nut and bolt drops the roller into its cradle. Reduces downtime, maintenance costs and nip points.

Change return rollers from walk way safely by one man operation
One locking nut and bolt to undo to drop roller into cradle for changing

Improved Safety & Lower Costs

Drastically reduces nip points from roller
Cage to entrap roller over any road or walkway
Reduces downtime and maintenance costings

Speak to us about EZ Drop Return Roller System

Field System Bays

Standard 3048mm bays for belt widths from 600 to 1200, supplied complete and ready to install. A wind hoop can also be supplied on request.

We can supply standard 3048mm bays for belt width sizes 600 to 1200
These come complete with the following items:
1 off Upright support leg section
2 off Side Rails with saddles
2 off Garland roller sets
1 off Return Roller
Wind hoop can also be supplied on request

Speak to us about Field System Bays

Blue IBI troughing roller sets on field system bay frames

Roller Supply

All types of rollers — impact rubber-covered, frames and return rollers — manufactured to comply with BS2890 standards, welded concentrically for increased longevity.

All types of troughing rollers including Impact Rubber Covered together with frames, return rollers plain or with rubber discs. 133mm, 152mm, 190mm & 275mm diameter discs available, also brackets to suit
Our rollers are manufactured to comply with BS2890 standards
The roller shell is cut accurately from steel tubing, the shafts are manufactured from EN1A steel
Our bearing housing has a low friction polyurethane multi-lip shaft labyrinth seal with precision deep groove ball bearings that range from 20mm to 35mm diameter. These bearing housings are flame retardant
Our tube ends are bored to allow the bearing housing to fit inside the tube then welded with a fully automated process to ensure the rollers are welded concentrically; this gives increased longevity to our rollers

Speak to us about Roller Supply

Troughing Rollers & Frames

Troughing rollers and frames to fit any width conveyor, available in both standard and stepped configurations, with a larger centre roller to carry more material.

We can supply these to fit any width conveyor
Come in trough angles from 20 degrees to 45 degrees
We can also supply these frames to fit your existing rollers
The larger centre roller allows more material to be carried up the belt

Stepped Troughing Frames and Rollers

These incorporate 3 rollers with adjustable side rollers that can be set at angles as follows:

20 Degrees
30 Degrees
40 Degrees
50 Degrees
60 Degrees

We can supply the frames and rollers to fit all belt widths.

Speak to us about Troughing Rollers & Frames

Black and blue IBI troughing roller set on a frame

Impact Cushion

Made for high-impact areas to drastically reduce belt wear and spillage, increasing skirting life and lowering maintenance cost and downtime.

For use in high impact areas
Drastically reduces belt wear
Reduces spillage
Increases skirting life
Reduces maintenance
Lowers costs

Absorbs Impact

Works on individual rubber pivot bushes for reducing impact
Rubber cones absorb impact reducing belt wear
Unique differential spring effect for rapid and large deflections
Absorbs potential damage from sharp or high velocity objects

Speak to us about Impact Cushion

Kwik Clamp

Fixes and adjusts skirt rubber quickly and efficiently, clamping one metre of skirting held securely by its serrated bottom edge.

For fast and efficient fixing and adjusting of skirt rubber
Kwik Clamps can be removed completely by undoing nut and turning "T" bolt to fully remove clamp
Clamps 1 metre of skirting which is held securely by the serrated bottom edge of the clamp
Simply offer up to the spill plate and weld into position, nothing on inside of spill plates to wear out

Speak to us about Kwik Clamp

Return Belt V Plough

Stops material spillage from damaging the tail drum, with a fully floating design that keeps constant contact with the belt and an adjustable scraping angle for greater efficiency.

A return belt plough effectively stops material spillage from damaging the tail drum
Depending on the lump size, the rogue material can often cause mis-tracking of the belt carcass
Our ploughs are fully floating to accommodate belt undulations and ensure constant contact and pressure with the belt throughout the life of the blade

Adjustable & Easy to Maintain

The blade has an adjustable scraping angle for greater efficiency
The blade carrier is equipped with an adjustable stop to prohibit the steel carrier from contacting the belt when the blade is worn out
When the low friction blade is worn it can be quickly & easily changed

Speak to us about Return Belt V Plough